Parameters |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
OPA2703 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
6V |
Number of Elements |
2 |
Nominal Supply Current |
400μA |
Output Current |
10mA |
Current - Supply |
160μA |
Slew Rate |
0.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
4V~12V ±2V~6V |
Input Offset Voltage (Vos) |
750μV |
Bandwidth |
1MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1000 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
93.98dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
160μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1MHz |
Max I/O Voltage |
750μV |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
OPA2703UA/2K5G4 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 750μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. 120dB should be the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Op amp has total of 2 elements. The operating supply voltage of the buffer op amp is rated at 6V. This linear amplifier pack is based on the TR axis. We recommend that you use this electronic part with an 160μA supply in order to get the best performance from it.
OPA2703UA/2K5G4 Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2703UA/2K5G4 Applications
There are a lot of Texas Instruments OPA2703UA/2K5G4 Instrumentational OP Amps applications.
- Video amplifiers
- Weak signal detection
- High speed sample
- Tablets
- Precision measurement
- Semiconductor detectors
- Measurements of Wheatstone bridge
- PDA
- Logarithmic operation circuits
- Signal filtering