Parameters |
Voltage - Supply, Single/Dual (±) |
4V~12V ±2V~6V |
Output Current per Channel |
40mA |
Input Offset Voltage (Vos) |
5mV |
Bandwidth |
20MHz |
Neg Supply Voltage-Nom (Vsup) |
-6V |
Unity Gain BW-Nom |
20000 kHz |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
90.46dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1.5mV |
Low-Bias |
YES |
Micropower |
NO |
Programmable Power |
NO |
Max I/O Voltage |
5mV |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
6V |
Terminal Pitch |
0.65mm |
Base Part Number |
OPA2725 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
6V |
Number of Elements |
2 |
Operating Supply Current |
4.3mA |
Nominal Supply Current |
11mA |
Output Current |
40mA |
Slew Rate |
30V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
88 dB |
Current - Input Bias |
30pA |
OPA2725AIDGKR Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 6V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 5mV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 4.3mA . Keeping the voltage gain at 120dB is the best course of action. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 6V. A TR-shaped amplifier is used to pack the buffer amps.
OPA2725AIDGKR Features
8 Pins
supply voltage of 6V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2725AIDGKR Applications
There are a lot of Texas Instruments OPA2725AIDGKR Instrumentational OP Amps applications.
- Power generator
- Power transmission
- High input resistance broadband
- Semiconductor detectors
- Image computer boards
- Active probe
- Large motor controllers
- Non-polarized electrodes
- Multiplication circuits
- Automation control systems