OPA2727AIDR

2 Channels 40mA per Channel 85pA 86 dB Instrumentational OP Amps 0.0005μA 6V 4V~12V ±2V~6V OPA2727 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2727AIDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 438
Description: 2 Channels 40mA per Channel 85pA 86 dB Instrumentational OP Amps 0.0005μA 6V 4V~12V ±2V~6V OPA2727 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	e-trim™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	OPA2727
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	6V
Number of Channels	2
Operating Supply Current	4.3mA
Supply Current-Max	6.5mA
Slew Rate	30V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	86 dB
Current - Input Bias	85pA
Voltage - Supply, Single/Dual (±)	4V~12V ±2V~6V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	150μV
Bandwidth	20MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	20000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0005μA
Power Supply Rejection Ratio (PSRR)	90.46dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	15μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.0005μA
Programmable Power	NO
Nominal Gain Bandwidth Product	20MHz
Max I/O Voltage	150μV
Input Offset Current-Max (IIO)	0.0001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2727AIDR Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 4.3mA . There should be no change in the voltage gain at 120dB. Op amp ic has 2 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 6V voltage. This linear amplifier pack is based on the TR axis. The e-trim? stands for the buffer op amp's serial number.