OPA27GP
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OPA27 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Channels | 1 |
| Operating Supply Current | 3.3mA |
| Nominal Supply Current | 5.7mA |
| Power Dissipation | 500mW |
| Slew Rate | 1.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±4V~22V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 124dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 8MHz |
| Max I/O Voltage | 100μV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
OPA27GP Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 25μV voltage. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 3.3mA . There should be no change in the voltage gain at 124dB. The op amp ic has 1 channels on it. The operating supply voltage of the buffer op amp is rated at 22V.
OPA27GP Features
8 Pins
supply voltage of 15V
124dB voltage gain
OPA27GP Applications
There are a lot of Texas Instruments OPA27GP Instrumentational OP Amps applications.
- Communication device
- Proportional counter tubes
- Inverse/same-phase proportional circuit
- Navigation
- Test and measurement instruments
- Industrial control system
- Portable docking station
- Micro signal measurement
- Gaming industry
- Power generator
