OPA2889IDGSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | OPA2889 |
| Pin Count | 10 |
| Number of Channels | 2 |
| Operating Supply Current | 920μA |
| Supply Current-Max | 1mA |
| Slew Rate | 250V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 2.6V~12V ±1.3V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 75MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 115000 kHz |
| Voltage Gain | 64dB |
| Average Bias Current-Max (IIB) | 0.88μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 25 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 115MHz |
| Bias Current-Max (IIB) @25C | 0.8μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 5mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2889IDGSR Overview
In the package, you will find a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. An op amp ic of the Voltage Feedback type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 10. The total number of pins on linear amplifier is 10. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 10 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . This op amp can operate from a supply current at 920μA. The voltage gain should stay at 64dB. Instrumentation amplifier has 2 channels on it. It is used TR to pack the op amps.
OPA2889IDGSR Features
10 Pins
supply voltage of 5V
64dB voltage gain
OPA2889IDGSR Applications
There are a lot of Texas Instruments OPA2889IDGSR Instrumentational OP Amps applications.
- Blood pressure sensors
- Video data acquisition
- Navigation
- Portable media players
- Laptop
- Fission chambers
- Instrumentation
- Scintillation detectors
- Division circuits
- Non-polarized electrodes
