OPA2889IDGST
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | OPA2889 |
| Pin Count | 10 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Operating Supply Current | 920μA |
| Output Current | 40mA |
| Supply Current-Max | 1mA |
| Slew Rate | 250V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 2.6V~12V ±1.3V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 75MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 115000 kHz |
| Voltage Gain | 64dB |
| Average Bias Current-Max (IIB) | 0.88μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 25 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 115MHz |
| Bias Current-Max (IIB) @25C | 0.8μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 5mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
OPA2889IDGST Overview
There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Voltage Feedback-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 10. Linear amplifier has a total of 10 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 10 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 5mV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Using an 920μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 64dB for the time being. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. For the packing of the instrumentation amplifier, TR is adopted.
OPA2889IDGST Features
10 Pins
supply voltage of 5V
64dB voltage gain
OPA2889IDGST Applications
There are a lot of Texas Instruments OPA2889IDGST Instrumentational OP Amps applications.
- Gaming industry
- Polarized electrodes
- Proportional counter tubes
- Signal amplification
- Semiconductor detectors
- Radiation thermometry transducers
- Non-polarized electrodes
- Comparator
- single/dual op amp sum and difference circuits
- Portable electronic products powered by batteries
