OPA2890IDGST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | OPA2890 |
| Pin Count | 10 |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Operating Supply Current | 2.25mA |
| Output Current | 40mA |
| Slew Rate | 400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 59 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 250000 kHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Voltage - Input Offset | 2mV |
| Settling Time | 16 ns |
| Low-Bias | YES |
| Micropower | YES |
| -3db Bandwidth | 250MHz |
| Bias Current-Max (IIB) @25C | 1.7μA |
| Programmable Power | NO |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 0.4μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2890IDGST Overview
In order to protect the op amps, a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 10 terminations. It consists of a total of 10 pins in total. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 10 pins. There is an input offset voltage of 5mV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.25mA and 10 . 60dB should be the voltage gain. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 9V. For the packing of the instrumentation amplifier, TR is adopted.
OPA2890IDGST Features
10 Pins
supply voltage of 5V
60dB voltage gain
OPA2890IDGST Applications
There are a lot of Texas Instruments OPA2890IDGST Instrumentational OP Amps applications.
- Signal filtering
- Biopotential
- Industrial control system
- Car stereo
- Digital cameras
- Power transmission
- Addition operation circuits
- Professional videography
- Semiconductor detectors
- Multimedia playback equipment
