OPA300AIDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | OPA300 |
| Pin Count | 6 |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 1 |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 12mA |
| Output Current | 70mA |
| Slew Rate | 80V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 150MHz |
| Unity Gain BW-Nom | 150000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.000005μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 150MHz |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 0.000005μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA300AIDBVT Overview
There is a SOT-23-6 case in which the instrumentation amplifier is packaged. Op amps are Voltage Feedback types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 6 terminations over the past year. In this case, there are 6 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. There are 6 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 9.5mA. It is recommended to keep the voltage gain at 106dB at all times. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. The instrumentation amplifier is packed in the form of TR.
OPA300AIDBVT Features
6 Pins
supply voltage of 5V
106dB voltage gain
OPA300AIDBVT Applications
There are a lot of Texas Instruments OPA300AIDBVT Instrumentational OP Amps applications.
- Medical instruments
- Differentiator circuits
- earphone
- Integrator circuits
- Wireless base stations
- Test equipment
- Mobile phone
- Signal operation
- Professional videography
- Automatic control
