OPA317IDBVT
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 300 kHz |
| Unity Gain BW-Nom | 300 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Input Voltage Noise Density | 55nV/sqrt Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | OPA317 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 21μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 108 dB |
| Current - Input Bias | 275pA |
OPA317IDBVT Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. Zero-Drift-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 5 terminations. It consists of a total of 5 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 5 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 20μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 21μA . Voltage gain should remain at 110dB. Op amp ic has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is used TR to pack the op amps.
OPA317IDBVT Features
5 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
OPA317IDBVT Applications
There are a lot of Texas Instruments OPA317IDBVT Instrumentational OP Amps applications.
- Differentiator circuits
- PDA
- E-book readers
- Radar
- Oscilloscopes
- Semiconductor detectors
- Fission chambers
- Portable media players
- Active probe
- Signal filtering
