OPA330AIDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA330 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 21μA |
| Nominal Supply Current | 21μA |
| Output Current | 5mA |
| Slew Rate | 0.16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 350kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 115dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 8μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 50μV |
| Wideband | NO |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA330AIDBVTG4 Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. Buffer amps of this type are called Zero-Drift-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 5. A total of 5 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 5 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. A supply current of 21μA can be used to operate this linear amplifier. Maintain 115dB as the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 1 elements in this buffer amplifier. The instrumentation amplifier is packed in the form of TR.
OPA330AIDBVTG4 Features
5 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA330AIDBVTG4 Applications
There are a lot of Texas Instruments OPA330AIDBVTG4 Instrumentational OP Amps applications.
- Video data acquisition
- Differentiator circuits
- Polarized electrodes
- Active probe
- Computer workstations
- Medical imaging
- MP3
- Subtraction operation circuits
- Signal operation
- Band-stop filter
