OPA330AIYFFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | OPA330 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 21μA |
| Nominal Supply Current | 21μA |
| Output Current | 5mA |
| Slew Rate | 0.16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 350kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 115dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 8μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 50μV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Height | 625μm |
| Length | 1mm |
| Width | 1.293mm |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA330AIYFFT Overview
In order to protect the op amps, a 5-UFBGA, DSBGA case is used. This is a Zero-Drift type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 5 pins. In terms of input offset voltage, operational amplifier rates 50μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . This op amp can operate from a supply current at 21μA. 115dB should remain the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The op amp is rated for an operating supply voltage of 1. This linear amplifier pack is based on the TR axis.
OPA330AIYFFT Features
5 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA330AIYFFT Applications
There are a lot of Texas Instruments OPA330AIYFFT Instrumentational OP Amps applications.
- Signal operation
- Instrumentation
- Wireless base stations
- Thermocouples
- Multimedia playback equipment
- Integrator circuits
- Micro signal measurement
- High-frequency data acquisition systems
- Ultrasound transducers
- Band-stop filter
