Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
OPA333 |
Pin Count |
5 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
2.75V |
Number of Channels |
1 |
Operating Supply Current |
17μA |
Nominal Supply Current |
25μA |
Output Current |
5mA |
Slew Rate |
0.16V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Zero-Drift |
Common Mode Rejection Ratio |
106 dB |
Current - Input Bias |
70pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±0.9V~2.75V |
Output Current per Channel |
5mA |
Input Offset Voltage (Vos) |
10μV |
Bandwidth |
350 kHz |
Unity Gain BW-Nom |
350 kHz |
Voltage Gain |
130dB |
Average Bias Current-Max (IIB) |
0.0002μA |
Power Supply Rejection Ratio (PSRR) |
120dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Voltage - Input Offset |
2μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.0002μA |
Programmable Power |
NO |
Max I/O Voltage |
10μV |
Input Offset Current-Max (IIO) |
0.0004μA |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA333AIDBVRG4 Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a Zero-Drift-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 5 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 10μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 17μA. The voltage gain should stay at 130dB. On the buffer amps, there are 1 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. The linear amplifier is packaged by using a TR axis.
OPA333AIDBVRG4 Features
5 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
OPA333AIDBVRG4 Applications
There are a lot of Texas Instruments OPA333AIDBVRG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Power generator
- Fast A/D and D/A converters
- Home audio systems
- PDA
- Communication
- Strain gauges
- Instrumentation
- Portable docking station
- Inverse/same-phase proportional circuit