OPA333AIDBVTG4

1 Channels 5mA per Channel 70pA 106 dB Instrumentational OP Amps 0.0002μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA333 5 Pins SC-74A, SOT-753

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA333AIDBVTG4
Package: SC-74A, SOT-753
Datasheet: -
Stock: 848
Description: 1 Channels 5mA per Channel 70pA 106 dB Instrumentational OP Amps 0.0002μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA333 5 Pins SC-74A, SOT-753(Kg)

Inquiry Now

Details

Tags

Parameters
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	OPA333
Pin Count	5
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Channels	1
Operating Supply Current	17μA
Nominal Supply Current	25μA
Output Current	5mA
Slew Rate	0.16V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	106 dB
Current - Input Bias	70pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	5mA
Input Offset Voltage (Vos)	10μV
Bandwidth	350 kHz
Unity Gain BW-Nom	350 kHz
Voltage Gain	130dB
Average Bias Current-Max (IIB)	0.0002μA
Power Supply Rejection Ratio (PSRR)	120dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	2μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.0002μA
Programmable Power	NO
Max I/O Voltage	10μV
Input Offset Current-Max (IIO)	0.0004μA
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Surface Mount	YES
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99

OPA333AIDBVTG4 Overview

There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Zero-Drift-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 5 terminations over the past year. A total of 5 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 5 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 10μV. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 17μA, this op amp ic can operate. Keeping the voltage gain at 130dB is the best course of action. There are 1 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. For the packing of the instrumentation amplifier, TR is adopted.