banner_page

OPA333AIDG4

1 Channels 5mA per Channel 70pA 106 dB Instrumentational OP Amps 0.0002μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA333 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA333AIDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 733
  • Description: 1 Channels 5mA per Channel 70pA 106 dB Instrumentational OP Amps 0.0002μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA333 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number OPA333
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 2.75V
Power Supplies 2/5V
Number of Channels 1
Operating Supply Current 17μA
Nominal Supply Current 25μA
Output Current 5mA
Slew Rate 0.16V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Zero-Drift
Common Mode Rejection Ratio 106 dB
Current - Input Bias 70pA
Voltage - Supply, Single/Dual (±) 1.8V~5.5V ±0.9V~2.75V
Output Current per Channel 5mA
Input Offset Voltage (Vos) 10μV
Bandwidth 350 kHz
Unity Gain BW-Nom 350 kHz
Voltage Gain 130dB
Average Bias Current-Max (IIB) 0.0002μA
Power Supply Rejection Ratio (PSRR) 120dB
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Voltage - Input Offset 2μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.0002μA
Programmable Power NO
Max I/O Voltage 10μV
Input Offset Current-Max (IIO) 0.0004μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

OPA333AIDG4 Overview


In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Zero-Drift-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 10μV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 17μA. 130dB should be the voltage gain. There are a total of 1 channels available on the op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 2.75V.

OPA333AIDG4 Features


8 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail

OPA333AIDG4 Applications


There are a lot of Texas Instruments OPA333AIDG4 Instrumentational OP Amps applications.

  • MP3
  • Professional videography
  • Division circuits
  • Test equipment
  • Vehicle electronics
  • Video amplifiers
  • Subtraction operation circuits
  • Gaming industry
  • Laptop
  • Band-stop filter

Write a review

Note: HTML is not translated!
    Bad           Good