OPA348AIDR
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 108dB |
| Power Supply Rejection Ratio (PSRR) | 84.44dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 5mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA348 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 45μA |
| Nominal Supply Current | 65μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.1V~5.5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
OPA348AIDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. The input offset voltage is 5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 45μA . Keeping the voltage gain at 108dB is the best course of action. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. 1 elements make up the design of this buffer amplifier. The linear amplifier is packaged by using a TR axis.
OPA348AIDR Features
8 Pins
supply voltage of 5V
108dB voltage gain
Output Type: Rail-to-Rail
OPA348AIDR Applications
There are a lot of Texas Instruments OPA348AIDR Instrumentational OP Amps applications.
- Scintillation detectors
- Medical instruments
- High input resistance broadband
- Integrator circuits
- PDA
- Industrial control system
- Broadcasting
- Test and measurement instruments
- Commercial audio systems
- Video amplifiers
