OPA353NA/3K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA353 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 8mA |
| Current - Supply | 5.2mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 44MHz |
| Unity Gain BW-Nom | 44000 kHz |
| Voltage Gain | 122dB |
| Power Supply Rejection Ratio (PSRR) | 87.96dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Current - Output / Channel | 40mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 44MHz |
| Max I/O Voltage | 8mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA353NA/3K Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. Buffer amplifier has a total of 5 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. In terms of input offset voltage, operational amplifier rates 8mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . 122dB should remain the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This linear amplifier has a total of 1 elements. For packing the buffer amplifier, the TR-axis is adopted. As a recommendation, this electronic component should be used with a power supply that can deliver 5.2mA. MicroAmplifier? is the number that corresponds to the series of the buffer op amp.
OPA353NA/3K Features
5 Pins
supply voltage of 5V
122dB voltage gain
Output Type: Rail-to-Rail
OPA353NA/3K Applications
There are a lot of Texas Instruments OPA353NA/3K Instrumentational OP Amps applications.
- Proportional counter tubes
- Home audio systems
- Inverse/same-phase proportional circuit
- Division circuits
- Logarithmic operation circuits
- Automotive sensors
- Displayers for aircraft and air transportation control systems
- Tablets
- Car stereo
- Image computer boards
