OPA354AQDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA354 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 4.9mA |
| Supply Current-Max | 6mA |
| Slew Rate | 150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 8mV |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 73.98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 250MHz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 100MHz |
| Max I/O Voltage | 8mV |
| Wideband | YES |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA354AQDBVRQ1 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. An op amp ic of the Voltage Feedback type. Linear amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. Buffer amplifier has a total of 6 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 5 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 8mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThis op amp can operate from a supply current at 4.9mA. Op amp is a member of the 110dB's 110dB family. A linear amplifier like this has 1 circuits on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 5V. The linear amplifier is packaged by using a TR axis. As the name implies, Automotive, AEC-Q100 refers to the series of the buffer op amp.
OPA354AQDBVRQ1 Features
6 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
OPA354AQDBVRQ1 Applications
There are a lot of Texas Instruments OPA354AQDBVRQ1 Instrumentational OP Amps applications.
- Signal amplification
- Inverse/same-phase proportional circuit
- Radar
- Power control
- Portable electronic products powered by batteries
- Semiconductor detectors
- Signal transformation
- Cinema or auditorium audio system
- Mobile phone
- Professional videography
