OPA355UA

1 Channels 100mA per Channel 3pA 66 dB Instrumentational OP Amps 0.00005μA 2.7V~5.5V OPA355 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA355UA
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 690
Description: 1 Channels 100mA per Channel 3pA 66 dB Instrumentational OP Amps 0.00005μA 2.7V~5.5V OPA355 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	OPA355
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	8.3mA
Nominal Supply Current	11mA
Slew Rate	360V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	CMOS
Common Mode Rejection Ratio	66 dB
Current - Input Bias	3pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	100mA
Input Offset Voltage (Vos)	9mV
Bandwidth	200MHz
Unity Gain BW-Nom	200000 kHz
Voltage Gain	92dB
Average Bias Current-Max (IIB)	0.00005μA
Power Supply Rejection Ratio (PSRR)	81.94dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7.5V
Settling Time	30 ns
Low-Bias	YES
Micropower	NO
-3db Bandwidth	450MHz
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Max I/O Voltage	2mV
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA355UA Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a CMOS-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 9mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 8.3mA , this buffer op amp will be able to operate. You should keep the voltage gain at 92dB for the time being. As far as the device is concerned, buffer amplifier has 1 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.