Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
OPA355 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Operating Supply Current |
8.3mA |
Nominal Supply Current |
11mA |
Slew Rate |
360V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
CMOS |
Common Mode Rejection Ratio |
66 dB |
Current - Input Bias |
3pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
9mV |
Bandwidth |
200MHz |
Unity Gain BW-Nom |
200000 kHz |
Voltage Gain |
92dB |
Average Bias Current-Max (IIB) |
0.00005μA |
Power Supply Rejection Ratio (PSRR) |
81.94dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7.5V |
Settling Time |
30 ns |
Low-Bias |
YES |
Micropower |
NO |
-3db Bandwidth |
450MHz |
Bias Current-Max (IIB) @25C |
0.00005μA |
Programmable Power |
NO |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.00005μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA355UA/2K5G4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp ic of the CMOS type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 9mV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 8.3mA . 92dB should remain the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. 1 elements make up the design of this buffer amplifier. It is used TR to pack the op amps.
OPA355UA/2K5G4 Features
8 Pins
supply voltage of 5V
92dB voltage gain
Output Type: Rail-to-Rail
OPA355UA/2K5G4 Applications
There are a lot of Texas Instruments OPA355UA/2K5G4 Instrumentational OP Amps applications.
- Computer workstations
- Logarithmic operation circuits
- Voltage regulation circuit
- Blood pressure sensors
- Instrumentation
- Video amplifiers
- Measurements of Wheatstone bridge
- Image computer boards
- Test and measurement instruments
- earphone