OPA356AQDBVRQ1
| Parameters | |
|---|---|
| -3db Bandwidth | 450MHz |
| Programmable Power | NO |
| Max I/O Voltage | 15mV |
| Wideband | YES |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA356 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 8.3mA |
| Slew Rate | 360V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 9mV |
| Gain Bandwidth Product | 200MHz |
| Unity Gain BW-Nom | 450000 kHz |
| Voltage Gain | 92dB |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Settling Time | 30 ns |
| Low-Bias | YES |
| Micropower | NO |
OPA356AQDBVRQ1 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. A Voltage Feedback-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 5 terminations this year. It consists of a total of 5 pins in total. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 5 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 9mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 8.3mA . Op amp is a member of the 92dB's 92dB family. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. TR is adopted to pack the instrumentation amplifier. This buffer amplifier is assigned within the Automotive, AEC-Q100 series by its manufacturer.
OPA356AQDBVRQ1 Features
5 Pins
supply voltage of 5V
92dB voltage gain
Output Type: Rail-to-Rail
OPA356AQDBVRQ1 Applications
There are a lot of Texas Instruments OPA356AQDBVRQ1 Instrumentational OP Amps applications.
- Addition operation circuits
- Radar
- Band-pass filter
- Power generator
- Gaming industry
- Laptop
- Scintillation detectors
- Differentiator circuits
- PDA
- Multiplication circuits
