OPA358AIDCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | OPA358 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 5.2mA |
| Nominal Supply Current | 7.5mA |
| Slew Rate | 55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~3.6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 80MHz |
| Unity Gain BW-Nom | 80000 kHz |
| Voltage Gain | 92dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Max I/O Voltage | 6mV |
| Wideband | YES |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA358AIDCKR Overview
There is a 6-TSSOP, SC-88, SOT-363 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. A total of 6 terminations have been reported in the past few weeks. It consists of a total of 6 pins in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 6 pins. There is an input offset voltage of 6mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 5.2mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 92dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage. The linear amplifier is packaged by using a TR axis.
OPA358AIDCKR Features
6 Pins
supply voltage of 3V
92dB voltage gain
Output Type: Rail-to-Rail
OPA358AIDCKR Applications
There are a lot of Texas Instruments OPA358AIDCKR Instrumentational OP Amps applications.
- Signal operation
- Biopotential
- Commercial audio systems
- Video conversion and routing
- High-frequency data acquisition systems
- Non-polarized electrodes
- Portable media players
- Video amplifiers
- High/low-pass filter circuit
- Micro signal measurement
