OPA364AIDBVTG4

1 Channels 85mA per Channel 1pA 74 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.75V OPA364 5 Pins SC-74A, SOT-753

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA364AIDBVTG4
Package: SC-74A, SOT-753
Datasheet: -
Stock: 741
Description: 1 Channels 85mA per Channel 1pA 74 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.75V OPA364 5 Pins SC-74A, SOT-753(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Surface Mount	YES
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	5
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.6V
Base Part Number	OPA364
Pin Count	5
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Channels	1
Operating Supply Current	1.1mA
Nominal Supply Current	1.4mA
Slew Rate	5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	74 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2.5mV
Bandwidth	7MHz
Unity Gain BW-Nom	7000 kHz
Voltage Gain	100dB
Power Supply Rejection Ratio (PSRR)	81.94dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1mV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Max I/O Voltage	2.5mV
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA364AIDBVTG4 Overview

In order to protect the op amps, a SC-74A, SOT-753 case is used. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. There are a total of 5 pins on this op amp. The linear amplifier should be run at 3.6V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 5 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 2.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . You can run this op amp ic on 1.1mA . There should be no change in the voltage gain at 100dB. Op amp ic has 1 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 2.75V. For packing the buffer amplifier, the TR-axis is adopted.