OPA364IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | OPA364 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.4mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 7MHz |
| Unity Gain BW-Nom | 7000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA364IDBVR Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. The total number of pins on linear amplifier is 5. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.6V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 5 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 500μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . You can run this op amp ic on 1.1mA . Voltage gain should remain at 100dB. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. A TR-shaped amplifier is used to pack the buffer amps.
OPA364IDBVR Features
5 Pins
supply voltage of 3.6V
100dB voltage gain
Output Type: Rail-to-Rail
OPA364IDBVR Applications
There are a lot of Texas Instruments OPA364IDBVR Instrumentational OP Amps applications.
- High speed sample
- High/low-pass filter circuit
- Polarized electrodes
- Video computer boards
- Exponential operation circuits
- Navigation
- earphone
- Medical instruments
- Logarithmic operation circuits
- Division circuits
