OPA3691IDBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 73.793809mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Base Part Number | OPA3691 |
| Pin Count | 16 |
| Number of Elements | 3 |
| Operating Supply Current | 15.3mA |
| Nominal Supply Current | 15.9mA |
| Slew Rate | 2100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 190mA |
| Input Offset Voltage (Vos) | 800μV |
| Bandwidth | 280MHz |
| Gain Bandwidth Product | 2GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 280000 kHz |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 8 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 40μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 3mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA3691IDBQR Overview
Packaged in a 16-SSOP (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Current Feedback-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be 16 terminations in the next few months. A total of 16 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 16 pins. Regarding input offset voltage, op amp rates 800μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Operational amplifier can operate supply current at 15.3mA. Op amp has total of 3 elements. An buffer amplifier is packed in a TR-shape according to the design.
OPA3691IDBQR Features
16 Pins
supply voltage of 5V
OPA3691IDBQR Applications
There are a lot of Texas Instruments OPA3691IDBQR Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Weighing systems
- Automotive sensors
- RF cable systems
- MP3
- PDA
- Precision measurement
- Gaming industry
- Signal operation
