OPA376AID

1 Channels 50mA per Channel 0.2pA 76 dB Instrumentational OP Amps 2.2V~5.5V ±1.1V~2.75V OPA376 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA376AID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 445
Description: 1 Channels 50mA per Channel 0.2pA 76 dB Instrumentational OP Amps 2.2V~5.5V ±1.1V~2.75V OPA376 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Power Supply Rejection Ratio (PSRR)	106.02dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	5μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Max I/O Voltage	25μV
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	e-trim™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.2V
Base Part Number	OPA376
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	2.5/5V
Number of Channels	1
Operating Supply Current	760μA
Nominal Supply Current	950μA
Output Current	30mA
Slew Rate	2V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	76 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	2.2V~5.5V ±1.1V~2.75V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	25μV
Bandwidth	5.5MHz
Unity Gain BW-Nom	5500 kHz
Voltage Gain	134dB

OPA376AID Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 2.2V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 25μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. An 760μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. e-trim? corresponds to the op amp's series.