OPA376AIDCKTG4
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | e-trim™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.2V |
| Base Part Number | OPA376 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 760μA |
| Nominal Supply Current | 950μA |
| Output Current | 30mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 134dB |
| Power Supply Rejection Ratio (PSRR) | 106.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 5μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Max I/O Voltage | 25μV |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
OPA376AIDCKTG4 Overview
In order to protect the op amps, a 5-TSSOP, SC-70-5, SOT-353 case is used. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. Buffer amplifier has a total of 5 pins. It is important to remember that this op amp should be operated at a voltage of 2.2V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 5 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 25μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThis op amp can operate from a supply current at 760μA. Keeping the voltage gain at 134dB is the best course of action. Buffer op amp is equipped with 1 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The instrumentation amplifier is packed in the form of TR. Buffer op amp series numbers are indicated by the e-trim?.
OPA376AIDCKTG4 Features
5 Pins
supply voltage of 2.2V
134dB voltage gain
Output Type: Rail-to-Rail
OPA376AIDCKTG4 Applications
There are a lot of Texas Instruments OPA376AIDCKTG4 Instrumentational OP Amps applications.
- Computer workstations
- Subtraction operation circuits
- Fission chambers
- Comparator
- Portable media players
- Weighing systems
- Instrumentation
- ECG equipment
- Active probe
- Power generator
