OPA379AIDCKTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA379 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 2.9μA |
| Nominal Supply Current | 5.5μA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 90 kHz |
| Unity Gain BW-Nom | 90 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 113.98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 400μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 90 kHz |
| Max I/O Voltage | 1.5mV |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA379AIDCKTG4 Overview
A 5-TSSOP, SC-70-5, SOT-353 case is used to package the op amp. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 5 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 2.9μA . You should keep the voltage gain at 120dB for the time being. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The total number of elements in this buffer amplifier is 1. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA379AIDCKTG4 Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA379AIDCKTG4 Applications
There are a lot of Texas Instruments OPA379AIDCKTG4 Instrumentational OP Amps applications.
- Test and measurement instruments
- Oscilloscopes
- MP3
- Strain gauges
- Navigation
- Medical imaging
- High speed sample
- Non-polarized electrodes
- Blood pressure sensors
- E-book readers
