OPA37GP
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OPA37 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Channels | 1 |
| Operating Supply Current | 3.3mA |
| Nominal Supply Current | 5.7mA |
| Power Dissipation | 500mW |
| Slew Rate | 11.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±4V~22V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 63MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 63000 kHz |
| Voltage Gain | 124dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 63MHz |
| Max I/O Voltage | 100μV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
OPA37GP Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 25μV as input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~85°C. An 3.3mA volt supply current is needed for this linear amplifier to operate. It is a member of the 124dB's 124dB family. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 22V voltage.
OPA37GP Features
8 Pins
supply voltage of 15V
124dB voltage gain
OPA37GP Applications
There are a lot of Texas Instruments OPA37GP Instrumentational OP Amps applications.
- Portable docking station
- Band-pass filter
- Ultrasound transducers
- Voltage regulation circuit
- Image computer boards
- Integrator circuits
- Television
- Portable electronic products powered by batteries
- Inverse/same-phase proportional circuit
- Exponential operation circuits
