OPA37GU/2K5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA37 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 1 |
| Nominal Supply Current | 5.7mA |
| Power Dissipation | 500mW |
| Current - Supply | 3.3mA |
| Slew Rate | 11.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±4V~22V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 63MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 63000 kHz |
| Voltage Gain | 124dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 25μV |
| Current - Output / Channel | 25mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 63MHz |
| Max I/O Voltage | 100μV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA37GU/2K5 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 100μV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is recommended to keep the voltage gain at 124dB at all times. There are 1 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 22V voltage. The linear amplifier is packaged by using a TR axis. It is recommended that you use an 3.3mA power supply with this electrical part in order for it to operate correctly.
OPA37GU/2K5 Features
8 Pins
supply voltage of 15V
124dB voltage gain
OPA37GU/2K5 Applications
There are a lot of Texas Instruments OPA37GU/2K5 Instrumentational OP Amps applications.
- Oscilloscopes
- Micro signal measurement
- Voltage regulation circuit
- Communication device
- Image computer boards
- Weighing systems
- Cinema or auditorium audio system
- Weak signal detection
- Television broadcasting equipment
- Semiconductor detectors
