OPA380AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Subcategory | Other Telecom ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA380 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 7.5mA |
| Nominal Supply Current | 7.5mA |
| Slew Rate | 80V/μs |
| Amplifier Type | Transimpedance |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 90MHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 112.4dB |
| Voltage - Input Offset | 4μV |
| Telecom IC Type | TELECOM CIRCUIT |
| Max I/O Voltage | 25μV |
| Input Voltage Noise Density | 67nV/sqrt Hz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA380AIDR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Transimpedance type. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Other Telecom ICs devices. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 25μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 7.5mA , this buffer op amp will be able to operate. Maintain 130dB as the voltage gain. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. Instrumentation amplifier resistance should remain within the range of 10 TΩ. As far as the device is concerned, buffer amplifier uses a telecom IC type of TELECOM CIRCUIT.
OPA380AIDR Features
8 Pins
supply voltage of 5V
130dB voltage gain
Resistance of 10 TΩ
OPA380AIDR Applications
There are a lot of Texas Instruments OPA380AIDR Instrumentational OP Amps applications.
- PDA
- Image computer boards
- Broadcasting
- Wireless base stations
- Medical instruments
- Television
- MP3
- Proportional counter tubes
- Radar
- Radiation thermometry transducers
