OPA381AIDGKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Other Telecom ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA381 |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1mA |
| Output Current | 10mA |
| Slew Rate | 12V/μs |
| Amplifier Type | Transimpedance |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 250 kHz |
| Gain Bandwidth Product | 18MHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 109.12dB |
| Voltage - Input Offset | 7μV |
| Settling Time | 7 μs |
| Max Input Current | 1mA |
| Telecom IC Type | TELECOM CIRCUIT |
| Max I/O Voltage | 25μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA381AIDGKT Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Other Telecom ICs-type of devices. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 25μV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 800μA supply current, this operational amplifier ics can be operated. 135dB should be the voltage gain. There are 1 channels on the operational amplifiers. There is a telecom IC type TELECOM CIRCUIT used in the buffer amplifier.
OPA381AIDGKT Features
8 Pins
supply voltage of 5V
135dB voltage gain
OPA381AIDGKT Applications
There are a lot of Texas Instruments OPA381AIDGKT Instrumentational OP Amps applications.
- Professional videography
- PDA
- Power control
- Communication device
- Fast A/D and D/A converters
- Fission chambers
- High-frequency data acquisition systems
- Portable electronic products powered by batteries
- Portable media players
- Broadcasting
