OPA3832ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | OPA3832 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 3 |
| Operating Supply Current | 12.75mA |
| Nominal Supply Current | 3.9mA |
| Output Current | 75mA |
| Slew Rate | 325V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 72 dB |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 82mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 90MHz |
| Unity Gain BW-Nom | 250000 kHz |
| Voltage Gain | 6dB |
| Average Bias Current-Max (IIB) | 12μA |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 12V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 250MHz |
| Max Frequency | 5MHz |
| Programmable Power | NO |
| Input Bias Current | 10μA |
| Input Offset Current-Max (IIO) | 1.5μA |
| Common-mode Reject Ratio-Min | 72 dB |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA3832ID Overview
There is a Tube package attached to class d amplifier.Consequently, class d amp is available in package 14-SOIC (0.154, 3.90mm Width).As a result of audio amplifiers high performance, audio amplifier is a great choice for Voltage Feedback.The PCB is mounted using the Surface Mount method.Audio amp can be located using its base part number OPA3832.There is 14 pin count on this board.Digital amplifier has 14 terminations.Its -3db bandwidth is 250MHz.It is included in Operational Amplifier.Audio amplifier is powered by 12.75mA supply current.Using 14 pins, amplifier ic is constructed.It is recommended to operate at a temperature below 85°C.Operating temperatures should not fall below -40°C.There are currently 3 channels available.In order to achieve high efficiency, the supply voltage is set to 3.3V.There is one amplifier type in the audio amplifier, which is OPERATIONAL AMPLIFIER.A value of 75mA is used in this scenario for the output current.It is observed that the audio amplifier ic gains a voltage of 6dB.
OPA3832ID Features
Operational Amplifier subcategory
14 pins
3 channels
OPA3832ID Applications
There are a lot of Texas Instruments OPA3832ID Video Amps and Modules applications.
- External Audio Amplifiers
- Automotive active noise cancellation
- Automotive
- Emergency call (eCall)
- Automotive head unit
- Audio Test and Measurement
- Premium Audio
- Professional Audio Equipment
- Car Audio
- HiFi Audio System Equipment
