OPA3832IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Base Part Number | OPA3832 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 3 |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 12.75mA |
| Nominal Supply Current | 3.9mA |
| Output Current | 75mA |
| Slew Rate | 325V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 72 dB |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 82mA |
| Input Offset Voltage (Vos) | 8mV |
| Gain Bandwidth Product | 250MHz |
| Unity Gain BW-Nom | 250000 kHz |
| Voltage Gain | 6dB |
| Average Bias Current-Max (IIB) | 12μA |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 12V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Bias Current | 10μA |
| Wideband | YES |
| Input Offset Current-Max (IIO) | 1.5μA |
| Common-mode Reject Ratio-Min | 72 dB |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA3832IPW Overview
There is a Tube package attached to class d amplifier.The 14-TSSOP (0.173, 4.40mm Width) package contains class d amp, in order to reduce space consumption.It is an excellent choice for Voltage Feedback because audio amplifier is highly efficient.Mounting audio power amplifier on the PCB is done using the Surface Mount method.Audio amp to it have the same base part number OPA3832.The pin count is 14.There are 14 terminations on digital amplifier.It is included in Operational Amplifier.A 12.75mA supply current is used for operation.Using 14 pins, amplifier ic is constructed.Temperatures should be below 85°C.The operating temperature should be at least -40°C.Using a voltage of 3.3V allows high efficiency.There is a type of amplifier OPERATIONAL AMPLIFIER on the audio amplifier.A value of 75mA is used in this scenario for the output current.It is observed that the audio amplifier ic gains a voltage of 6dB.The total number of elements in audio amplifier is 3.
OPA3832IPW Features
Operational Amplifier subcategory
14 pins
OPA3832IPW Applications
There are a lot of Texas Instruments OPA3832IPW Video Amps and Modules applications.
- Preamplification and Filtering
- Audio Test And Measurement
- Automotive head unit
- Automotive active noise cancellation
- Analog and Digital Mixing Consoles
- HiFi Audio System Equipment
- Aftermarket telematics
- Professional Audio Equipment
- Microphone Preamplifiers
- Automotive external amplifier
