OPA4141AIPW

4 Channels 36mA per Channel 2pA 120 dB Instrumentational OP Amps 0.00002μA 18V 4.5V~36V ±2.25V~18V OPA4141 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA4141AIPW
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 607
Description: 4 Channels 36mA per Channel 2pA 120 dB Instrumentational OP Amps 0.00002μA 18V 4.5V~36V ±2.25V~18V OPA4141 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	18V
Base Part Number	OPA4141
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Number of Channels	4
Operating Supply Current	1.8mA
Nominal Supply Current	2.3mA
Output Current	36mA
Slew Rate	20V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	120 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	36mA
Input Offset Voltage (Vos)	3.5mV
Bandwidth	10MHz
Neg Supply Voltage-Nom (Vsup)	-18V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	126dB
Average Bias Current-Max (IIB)	0.00002μA
Power Supply Rejection Ratio (PSRR)	137.07dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	20V
Voltage - Input Offset	1mV
Low-Bias	YES
Micropower	NO
Max Frequency	1MHz
Bias Current-Max (IIB) @25C	0.00002μA
Programmable Power	NO
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	3.5mV
Input Offset Current-Max (IIO)	0.001μA
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA4141AIPW Overview

Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the J-FET type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 14 terminations in the next few months. The total number of pins on linear amplifier is 14. As a reminder, this buffer op amp should be powered by 18V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are located on the operational amplifiers. Op amp rates 3.5mV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureOperational amplifier can operate supply current at 1.8mA. Voltage gain should remain at 126dB. There are 4 channels on the operational amplifiers. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 18V.