OPA4170AID

4 Channels 20mA per Channel 8pA 104 dB Instrumentational OP Amps 0.0035μA 18V 2.7V~36V ±1.35V~18V OPA4170 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA4170AID
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 997
Description: 4 Channels 20mA per Channel 8pA 104 dB Instrumentational OP Amps 0.0035μA 18V 2.7V~36V ±1.35V~18V OPA4170 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	18V
Terminal Pitch	1.27mm
Base Part Number	OPA4170
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Power Supplies	+-1.35/+-18/2.7/36V
Number of Channels	4
Operating Supply Current	110μA
Nominal Supply Current	110μA
Output Current	17mA
Slew Rate	0.4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	104 dB
Current - Input Bias	8pA
Voltage - Supply, Single/Dual (±)	2.7V~36V ±1.35V~18V
Output Current per Channel	20mA
Input Offset Voltage (Vos)	1.8mV
Bandwidth	1.2MHz
Neg Supply Voltage-Nom (Vsup)	-18V
Unity Gain BW-Nom	1200 kHz
Voltage Gain	130dB
Average Bias Current-Max (IIB)	0.0035μA
Power Supply Rejection Ratio (PSRR)	120dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	20V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	YES
Max Frequency	1MHz
Bias Current-Max (IIB) @25C	0.000015μA
Programmable Power	NO
Nominal Gain Bandwidth Product	1.2MHz
Max I/O Voltage	1.8mV
Input Offset Current-Max (IIO)	0.000015μA
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)

OPA4170AID Overview

There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. A total of 14 terminations have been reported in the past few weeks. A total of 14 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 18V volts. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 14 pins. The input offset voltage is 1.8mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 110μA , this buffer op amp will be able to operate. Voltage gain should remain at 130dB. The op amp ic has 4 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 18V voltage.