Parameters |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
18V |
Base Part Number |
OPA4170 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
18V |
Number of Elements |
4 |
Power Supplies |
+-1.35/+-18/2.7/36V |
Operating Supply Current |
110μA |
Nominal Supply Current |
110μA |
Output Current |
17mA |
Slew Rate |
0.4V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
104 dB |
Current - Input Bias |
8pA |
Voltage - Supply, Single/Dual (±) |
2.7V~36V ±1.35V~18V |
Output Current per Channel |
20mA |
Input Offset Voltage (Vos) |
1.8mV |
Bandwidth |
1.2MHz |
Neg Supply Voltage-Nom (Vsup) |
-18V |
Unity Gain BW-Nom |
1200 kHz |
Voltage Gain |
130dB |
Average Bias Current-Max (IIB) |
0.0035μA |
Power Supply Rejection Ratio (PSRR) |
120dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
20V |
Voltage - Input Offset |
250μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000015μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.2MHz |
Max I/O Voltage |
1.8mV |
Input Offset Current-Max (IIO) |
0.000015μA |
OPA4170AIPWR Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 18V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 14 pins on this chip. Op amp ic rates 1.8mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 110μA . 130dB should be the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. As a result of this, the buffer amplifier is packed in TR.
OPA4170AIPWR Features
14 Pins
supply voltage of 18V
130dB voltage gain
Output Type: Rail-to-Rail
OPA4170AIPWR Applications
There are a lot of Texas Instruments OPA4170AIPWR Instrumentational OP Amps applications.
- Video conversion and routing
- Signal operation
- E-book readers
- Active probe
- Automatic control
- Cinema or auditorium audio system
- Communication
- Non-polarized electrodes
- Ultrasound transducers
- Signal filtering