OPA4171AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 18V |
| Terminal Pitch | 1.27mm |
| Base Part Number | OPA4171 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-18/2.7/36V |
| Operating Supply Current | 475μA |
| Nominal Supply Current | 475μA |
| Output Current | 25mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 8pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 250μV |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0035μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000015μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 1.8mV |
| Wideband | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4171AID Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 14. Linear amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 18V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 14 pins are located on the operational amplifiers. Op amp rates 250μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 475μA . Op amp is a member of the 130dB's 130dB family. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The total number of elements in this buffer amplifier is 4. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
OPA4171AID Features
14 Pins
supply voltage of 18V
130dB voltage gain
Output Type: Rail-to-Rail
OPA4171AID Applications
There are a lot of Texas Instruments OPA4171AID Instrumentational OP Amps applications.
- ECG equipment
- Semiconductor detectors
- Strain gauges
- Video amplifiers
- Voltage regulation circuit
- Weak signal detection
- Large motor controllers
- Television broadcasting equipment
- Power control
- Medical instruments
