OPA4171AIPWR

4 Channels 35mA per Channel 8pA 104 dB Instrumentational OP Amps 0.0035μA 18V 2.7V~36V ±1.35V~18V OPA4171 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA4171AIPWR
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 126
Description: 4 Channels 35mA per Channel 8pA 104 dB Instrumentational OP Amps 0.0035μA 18V 2.7V~36V ±1.35V~18V OPA4171 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Unity Gain BW-Nom	3000 kHz
Voltage Gain	130dB
Average Bias Current-Max (IIB)	0.0035μA
Power Supply Rejection Ratio (PSRR)	120dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	20V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000015μA
Programmable Power	NO
Nominal Gain Bandwidth Product	3MHz
Max I/O Voltage	1.8mV
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	18V
Base Part Number	OPA4171
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Power Supplies	+-1.35/+-18/2.7/36V
Number of Channels	4
Operating Supply Current	475μA
Nominal Supply Current	475μA
Output Current	25mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	104 dB
Current - Input Bias	8pA
Voltage - Supply, Single/Dual (±)	2.7V~36V ±1.35V~18V
Output Current per Channel	35mA
Input Offset Voltage (Vos)	250μV
Bandwidth	3MHz
Neg Supply Voltage-Nom (Vsup)	-18V

OPA4171AIPWR Overview

Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 18V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 250μV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 475μA, this op amp ic can operate. Maintain 130dB as the voltage gain. The op amp ic has 4 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 18V. A TR-shaped amplifier is used to pack the buffer amps.