OPA4188AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Terminal Pitch | 1.27mm |
| Base Part Number | OPA4188 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Operating Supply Current | 415μA |
| Nominal Supply Current | 475μA |
| Output Current | 18mA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 160pA |
| Voltage - Supply, Single/Dual (±) | ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 6μV |
| Gain Bandwidth Product | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 136dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2MHz |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0028μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4188AIDR Overview
OPA4188AIDR amplifier has a single supply. OPA4188AIDR amp is low-power CMOS operational amplifier. The low current of the supply, as well as the input current bias, is a perfect fit for low-power devices such as smoke detectors as well as other sensors with high impedance. OPA4188AIDR IC is ideal for applications that require low power on a single supply.
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. A Cut Tape (CT) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 14. Buffer amplifier has a total of 14 pins on it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 6μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 415μA , this buffer op amp will be able to operate. Voltage gain should remain at 136dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TR-axis is adopted.
OPA4188AIDR Features
14 Pins
136dB voltage gain
Output Type: Rail-to-Rail
OPA4188AIDR Applications
There are a lot of Texas Instruments OPA4188AIDR Instrumentational OP Amps applications.
E-book readers
Signal amplification
Professional videography
Precision measurement
earphone
Medical imaging
Gaming industry
Comparator
Division circuits
Hand-held batteries
