OPA4188AIPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~150°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Base Part Number | OPA4188 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 415μA |
| Nominal Supply Current | 415μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 160pA |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 6μV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 136dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 2MHz |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0028μA |
| Input Voltage Noise Density | 8.8nV/sqrt Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4188AIPW Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. A total of 14 terminations have been reported in the past few weeks. Linear amplifier has a total of 14 pins. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 14 pins on it. Regarding input offset voltage, buffer amplifier rates 6μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~150°C . Operational amplifier can operate supply current at 415μA. The voltage gain should stay at 136dB. There are a total of 4 channels available on the op amps. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
OPA4188AIPW Features
14 Pins
136dB voltage gain
Output Type: Rail-to-Rail
OPA4188AIPW Applications
There are a lot of Texas Instruments OPA4188AIPW Instrumentational OP Amps applications.
- Navigation
- Fission chambers
- Strain gauges
- Information processing
- Exponential operation circuits
- Radiation thermometry transducers
- Proportional counter tubes
- Switching amplifier
- Video conversion and routing
- Wireless base stations
