OPA4188AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~150°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Base Part Number | OPA4188 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 415μA |
| Nominal Supply Current | 415μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 160pA |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 6μV |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 136dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 2MHz |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0028μA |
| Input Voltage Noise Density | 8.8nV/sqrt Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4188AIPWR Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. Op amps are Zero-Drift types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. There are a total of 14 pins on this op amp. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 14 pins are available on the instrumentation amplifier. There is an input offset voltage of 6μV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -55°C~150°C when it comes to operating temperatureThis op amp can operate from a supply current at 415μA. There should be no change in the voltage gain at 136dB. There are 4 circuits on op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A TR-shaped amplifier is used to pack the buffer amps.
OPA4188AIPWR Features
14 Pins
136dB voltage gain
Output Type: Rail-to-Rail
OPA4188AIPWR Applications
There are a lot of Texas Instruments OPA4188AIPWR Instrumentational OP Amps applications.
- Strain gauges
- Industrial applications including automation
- Digital cameras
- Power control
- Signal operation
- Thermocouples
- Proportional counter tubes
- Commercial audio systems
- Automatic control
- Automation control systems
