OPA4209AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA4209 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.5mA |
| Output Current | 65mA |
| Slew Rate | 6.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 150μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 18000 kHz |
| Voltage Gain | 132dB |
| Average Bias Current-Max (IIB) | 0.015μA |
| Power Supply Rejection Ratio (PSRR) | 146.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 35μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 18MHz |
| Max I/O Voltage | 150μV |
| Wideband | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4209AIPWR Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 14 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 150μV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . A supply current of 2.2mA can be used to operate this linear amplifier. It is a member of the 132dB's 132dB family. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A voltage rating of 4 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For the packing of the instrumentation amplifier, TR is adopted.
OPA4209AIPWR Features
14 Pins
supply voltage of 15V
132dB voltage gain
Output Type: Rail-to-Rail
OPA4209AIPWR Applications
There are a lot of Texas Instruments OPA4209AIPWR Instrumentational OP Amps applications.
- Large motor controllers
- Polarized electrodes
- Fast A/D and D/A converters
- Medical instruments
- Video computer boards
- Industrial control system
- Power generator
- Band-pass filter
- Video conversion and routing
- Video amplifiers
