OPA4227PA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA4227 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 3.7mA |
| Nominal Supply Current | 3.8mA |
| Output Current | 45mA |
| Slew Rate | 2.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2.5nA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 160dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 126.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 8MHz |
| Max I/O Voltage | 200μV |
| Input Offset Current-Max (IIO) | 0.01μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
OPA4227PA Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. We are approaching the 14h termination of the year. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 200μV. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 3.7mA . Keeping the voltage gain at 160dB is the best course of action. On the buffer amps, there are 4 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
OPA4227PA Features
14 Pins
supply voltage of 15V
160dB voltage gain
OPA4227PA Applications
There are a lot of Texas Instruments OPA4227PA Instrumentational OP Amps applications.
- E-book readers
- Medical imaging
- Communication device
- Signal filtering
- Displayers for aircraft and air transportation control systems
- Automotive sensors
- Power control
- Portable docking station
- High gain DC amplifier
- ECG equipment
