OPA4227PAG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA4227 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 3.7mA |
| Nominal Supply Current | 3.8mA |
| Output Current | 45mA |
| Slew Rate | 2.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2.5nA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 160dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 126.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 8MHz |
| Max I/O Voltage | 200μV |
| Input Offset Current-Max (IIO) | 0.01μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4227PAG4 Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 14. Buffer amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 14 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. This electronic component is recommended to be mounted using the mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 3.7mA . 160dB should be the voltage gain. 4 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
OPA4227PAG4 Features
14 Pins
supply voltage of 15V
160dB voltage gain
OPA4227PAG4 Applications
There are a lot of Texas Instruments OPA4227PAG4 Instrumentational OP Amps applications.
- Power control
- Measurements of Wheatstone bridge
- Communication
- Scintillation detectors
- Tablets
- Hand-held batteries
- Test equipment
- Cinema or auditorium audio system
- Instrumentation
- Radar
