banner_page

OPA4228PA

4 Channels 45mA per Channel 2.5nA 120 dB Instrumentational OP Amps 0.01μA 18V 5V~36V ±2.5V~18V OPA4228 14 Pins 14-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA4228PA
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 948
  • Description: 4 Channels 45mA per Channel 2.5nA 120 dB Instrumentational OP Amps 0.01μA 18V 5V~36V ±2.5V~18V OPA4228 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 4
Supply Voltage 15V
Base Part Number OPA4228
Pin Count 14
Operating Supply Voltage 18V
Power Supplies +-5/+-15V
Number of Channels 4
Operating Supply Current 3.7mA
Nominal Supply Current 3.8mA
Output Current 45mA
Slew Rate 11V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 120 dB
Current - Input Bias 2.5nA
Voltage - Supply, Single/Dual (±) 5V~36V ±2.5V~18V
Output Current per Channel 45mA
Input Offset Voltage (Vos) 200μV
Bandwidth 33MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 33000 kHz
Voltage Gain 160dB
Average Bias Current-Max (IIB) 0.01μA
Power Supply Rejection Ratio (PSRR) 126.02dB
Low-Offset YES
Frequency Compensation YES AVCL>=5
Voltage - Input Offset 10μV
Low-Bias NO
Micropower NO
Bias Current-Max (IIB) @25C 0.01μA
Programmable Power NO
Dual Supply Voltage 9V
Nominal Gain Bandwidth Product 33MHz
Max I/O Voltage 200μV
Input Offset Current-Max (IIO) 0.01μA
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

OPA4228PA Overview


Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic part is recommended for mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . An 3.7mA volt supply current is needed for this linear amplifier to operate. Maintain 160dB as the voltage gain. There are 4 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 18V voltage.

OPA4228PA Features


14 Pins
supply voltage of 15V
160dB voltage gain

OPA4228PA Applications


There are a lot of Texas Instruments OPA4228PA Instrumentational OP Amps applications.

  • Multiplication circuits
  • Radiation thermometry transducers
  • Television broadcasting equipment
  • Television
  • Professional videography
  • Switching amplifier
  • Precision measurement
  • Strain gauges
  • Measurements of Wheatstone bridge
  • Video data acquisition

Write a review

Note: HTML is not translated!
    Bad           Good