OPA4241PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | OPA4241 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-18/2.7/36V |
| Operating Supply Current | 27μA |
| Nominal Supply Current | 120μA |
| Slew Rate | 0.01V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 35 kHz |
| Unity Gain BW-Nom | 35 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.02μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 35 kHz |
| Max I/O Voltage | 250μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.005μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4241PA Overview
There is a 14-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be 14 terminations in the next few months. In this case, there are 14 pins on the board. This linear amplifier should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 250μV. This electronic component is recommended to be mounted using the mounting type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 27μA. There should be no change in the voltage gain. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
OPA4241PA Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA4241PA Applications
There are a lot of Texas Instruments OPA4241PA Instrumentational OP Amps applications.
- Automatic control
- Signal filtering
- High-frequency data acquisition systems
- Exponential operation circuits
- Logarithmic operation circuits
- Video amplifiers
- Vehicle electronics
- Displayers for aircraft and air transportation control systems
- Signal amplification
- RF cable systems
