OPA4277PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA4277 |
| Pin Count | 14 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 790μA |
| Nominal Supply Current | 825μA |
| Output Current | 35mA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0028μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 50μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0028μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4277PA Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins on it. Please take in mind that this instrumentation amplifier should be run at 15V. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 14 pins. The input offset voltage is 20μV. Through Hole is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . This op amp can operate from a supply current at 790μA. You should keep the voltage gain at 140dB for the time being. Buffer op amp is equipped with 4 channels on the device.
OPA4277PA Features
14 Pins
supply voltage of 15V
140dB voltage gain
OPA4277PA Applications
There are a lot of Texas Instruments OPA4277PA Instrumentational OP Amps applications.
- Industrial applications including automation
- Inverse/same-phase proportional circuit
- Mobile phone
- Exponential operation circuits
- Radar
- Instrumentation
- Power transmission
- Differentiator circuits
- Automotive sensors
- Tablets
