OPA4314AIPW

20mA per Channel 0.2pA 66 dB Instrumentational OP Amps 0.006μA 1.8V~5.5V ±0.9V~2.75V OPA4314 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA4314AIPW
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 957
Description: 20mA per Channel 0.2pA 66 dB Instrumentational OP Amps 0.006μA 1.8V~5.5V ±0.9V~2.75V OPA4314 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Bulk
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TUBE
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Base Part Number	OPA4314
Pin Count	14
Output Type	Rail-to-Rail
Number of Elements	4
Power Supplies	+-0.9/+-2.75/1.8/5.5V
Operating Supply Current	150μA
Nominal Supply Current	150μA
Output Current	20mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	20mA
Input Offset Voltage (Vos)	2.5mV
Unity Gain BW-Nom	3000 kHz
Voltage Gain	128dB
Average Bias Current-Max (IIB)	0.006μA
Power Supply Rejection Ratio (PSRR)	78dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	YES
Max Frequency	3MHz
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Wideband	NO
Input Offset Current-Max (IIO)	0.00001μA
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA4314AIPW Overview

The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Bulk case. A total of 14 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 14 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 2.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 150μA . It is recommended to keep the voltage gain at 128dB at all times. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A total of 4 elements are present in this linear amplifier. A TUBE-shaped amplifier is used to pack the buffer amps.