OPA4314AIPWR
| Parameters | |
|---|---|
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | OPA4314 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-0.9/+-2.75/1.8/5.5V |
| Operating Supply Current | 150μA |
| Nominal Supply Current | 150μA |
| Output Current | 20mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 128dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
OPA4314AIPWR Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. This is a General Purpose type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. It has 14 pins that make up the linear amplifier. Op amp rates 2.5mV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. Operational amplifier can operate supply current at 150μA. Maintain 128dB as the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 4 elements make up the design of this buffer amplifier. For the packing of the instrumentation amplifier, TR is adopted.
OPA4314AIPWR Features
14 Pins
supply voltage of 5V
128dB voltage gain
Output Type: Rail-to-Rail
OPA4314AIPWR Applications
There are a lot of Texas Instruments OPA4314AIPWR Instrumentational OP Amps applications.
- Exponential operation circuits
- High/low-pass filter circuit
- ECG equipment
- Fast A/D and D/A converters
- Home audio systems
- Portable media players
- Large motor controllers
- Multiplication circuits
- Division circuits
- single/dual op amp sum and difference circuits
