OPA4322AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | OPA4322 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-0.9/+-2.75/1.8/5.5V |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 65mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 2mV |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 20MHz |
| Max I/O Voltage | 2mV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA4322AIPWR Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. Buffer amps of this type are called General Purpose-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. This linear amplifier should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 14 pins on it. Op amp ic rates 2mV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 1.4mA . Keeping the voltage gain at 130dB is the best course of action. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are 4 elements in this buffer amplifier. The linear amplifier is packaged by using a TR axis.
OPA4322AIPWR Features
14 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
OPA4322AIPWR Applications
There are a lot of Texas Instruments OPA4322AIPWR Instrumentational OP Amps applications.
- Band-stop filter
- Gaming industry
- Band-pass filter
- Measurements of Wheatstone bridge
- Portable media players
- High speed sample
- Logarithmic operation circuits
- High-frequency data acquisition systems
- Thermocouples
- Biopotential
